600 x 1200 mm GVT — Glazed Vitrified Tiles
Where digital printing starts to pay off properly: at this size a marble decor runs long enough that the veining reads as continuous stone rather than as a repeating pattern.
- 2 pieces per box — 1.44 m² coverage
- 9 mm thick, 27 kg per box
- Around 1,200 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 600 x 1200 mm
- 60 x 120 cm
- 24 x 48 in
- Thickness 9 mm
- Rectified edges
Per Box
- 2 pieces
- 1.44 m² coverage
- 27 kg gross
Per Pallet
- 36 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,200 m²
- 40ft: approx 2,450 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Calacatta Gold
White with bold gold-grey veins · Matt
Wide, confident veining in gold and warm grey across a bright white ground. At 600x1200 a single vein can run the better part of a metre and a half, w...
Calacatta Gold ›Emperador Brown
Deep brown with pale veining · Matt
A deep chocolate brown threaded with fine pale gold and cream veins, after the Spanish Emperador marbles. A warm, enclosing floor that suits tradition...
Emperador Brown ›Pietra Grey
Charcoal grey with white veining · Matt
Charcoal grey cut by sharp white veins, in the manner of Italian Pietra Grigia. The high contrast between vein and ground makes it one of the most pho...
Pietra Grey ›Oxide Rust
Weathered terracotta and iron · Textured matt
A weathered oxidised surface in terracotta, iron and burnt orange, closer to corroded metal than to stone. Unusual, and used deliberately — it appears...
Oxide Rust ›Where this format is used
- Marble-effect living room floors
- Full-height bathroom walls
- Hotel guest rooms
- Retail and showroom floors
All GVT — Glazed Vitrified formats · About GVT — Glazed Vitrified tiles · Tile size guide
60 x 120 cm GVT — Glazed Vitrified — common questions
How many 60 x 120 cm tiles are in a box?
2 pieces, covering 1.44 square metres and weighing about 27 kg gross. A pallet holds 36 boxes.
How many square metres fit in a container?
Approximately 1,200 m² in a 20-foot container and 2,450 m² in a 40-foot, at 9 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 60 x 120 cm in inches?
About 24 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 60 x 120 cm GVT — Glazed Vitrified
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide