600 x 600 mm Outdoor & 20 mm Pavers Tiles
The bonded outdoor format, laid in adhesive over a screed with a fall built in. R11 textured surfaces give the wet grip an open terrace needs, and the body is frost resistant so trapped water cannot split it.
- 4 pieces per box — 1.44 m² coverage
- 10 mm thick, 30 kg per box
- Around 1,120 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 600 x 600 mm
- 60 x 60 cm
- 24 x 24 in
- Thickness 10 mm
- Rectified edges
Per Box
- 4 pieces
- 1.44 m² coverage
- 30 kg gross
Per Pallet
- 36 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,120 m²
- 40ft: approx 2,280 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Quartz Grey R11
Mid grey, granular · Textured anti-slip
A mid grey with a granular quartz-like texture, rated R11 for open terraces and patios. The texture is coarse enough to hold grip under standing water...
Quartz Grey R11 ›Terracotta Red
Warm earth red · Textured anti-slip
The warm earth red of fired clay pavers, in a frost-resistant porcelain body that will not spall, absorb water or grow moss the way real terracotta do...
Terracotta Red ›Slate Black R11
Near-black, riven texture · Riven anti-slip
A near-black with a riven surface following the cleft of split slate, rated R11. Striking around a pool or against planting — but it absorbs heat, so...
Slate Black R11 ›Where this format is used
- Terraces and patios bonded to screed
- Balconies
- Covered walkways
- Compound and courtyard paving
All Outdoor & 20 mm Pavers formats · About Outdoor & 20 mm Pavers tiles · Tile size guide
60 x 60 cm Outdoor & 20 mm Pavers — common questions
How many 60 x 60 cm tiles are in a box?
4 pieces, covering 1.44 square metres and weighing about 30 kg gross. A pallet holds 36 boxes.
How many square metres fit in a container?
Approximately 1,120 m² in a 20-foot container and 2,280 m² in a 40-foot, at 10 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 60 x 60 cm in inches?
About 24 x 24 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 60 x 60 cm Outdoor & 20 mm Pavers
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide