600 x 1200 mm Full Body Vitrified Tiles
Large format with half the joints of a 600x600 floor. The size that makes a room read as one continuous surface — and the one that most rewards a properly levelled screed, because lippage between two rigid metre-long tiles shows.
- 2 pieces per box — 1.44 m² coverage
- 9 mm thick, 28 kg per box
- Around 1,180 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 600 x 1200 mm
- 60 x 120 cm
- 24 x 48 in
- Thickness 9 mm
- Rectified edges
Per Box
- 2 pieces
- 1.44 m² coverage
- 28 kg gross
Per Pallet
- 36 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,180 m²
- 40ft: approx 2,400 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Stone Grey
Mid grey, neutral · Matt
A flat mid grey with a fine natural speckle, close to honed limestone in tone but without any directional pattern. It is the most forgiving floor colo...
Stone Grey ›Terrazzo White
Off-white with mixed aggregate · Matt
An off-white body carrying a scattered aggregate of grey, charcoal and warm buff chips, in the manner of a poured terrazzo floor. The chips are presse...
Terrazzo White ›Concrete Ash
Cool pale grey · Matt, lightly textured
The tone of fresh fair-faced concrete — cool, pale and slightly uneven, with the faint cloudiness of a poured slab rather than a flat paint colour. It...
Concrete Ash ›Basalt Charcoal
Deep charcoal, near black · Matt
A deep charcoal with the dense, slightly granular character of volcanic basalt. Dramatic in a room with strong natural light and a poor choice in one...
Basalt Charcoal ›Where this format is used
- Large format residential floors
- Hotel and commercial lobbies
- Feature walls
- Open-plan living areas
All Full Body Vitrified formats · About Full Body Vitrified tiles · Tile size guide
60 x 120 cm Full Body Vitrified — common questions
How many 60 x 120 cm tiles are in a box?
2 pieces, covering 1.44 square metres and weighing about 28 kg gross. A pallet holds 36 boxes.
How many square metres fit in a container?
Approximately 1,180 m² in a 20-foot container and 2,400 m² in a 40-foot, at 9 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 60 x 120 cm in inches?
About 24 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 60 x 120 cm Full Body Vitrified
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide