600 x 600 mm Full Body Vitrified Tiles
The global volume format. Divides cleanly into almost any room, is light enough for one person to lay, and is the size most projects default to when there is no reason to do otherwise.
- 4 pieces per box — 1.44 m² coverage
- 9 mm thick, 26 kg per box
- Around 1,250 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 600 x 600 mm
- 60 x 60 cm
- 24 x 24 in
- Thickness 9 mm
- Rectified edges
Per Box
- 4 pieces
- 1.44 m² coverage
- 26 kg gross
Per Pallet
- 40 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,250 m²
- 40ft: approx 2,550 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Ivory Cream
Warm off-white · Matt
A warm off-white with a faint cream undertone, which keeps a large pale floor from reading as clinical the way a pure white does. The most widely spec...
Ivory Cream ›Sandstone Beige
Warm mid beige · Matt, lightly textured
A warm mid beige with a fine granular speckle, taking its character from weathered sandstone. Its practical advantage is that it hides the fine dust t...
Sandstone Beige ›Graphite Black
Dense black, slight grey cast · Matt
A dense near-black with a faint graphite sheen under raking light. Used mostly as a contrast rather than as a whole floor — a border, an inset band, a...
Graphite Black ›Salt & Pepper Grey
Mid grey, high speckle · Matt
A heavily speckled grey in the classic salt-and-pepper pattern that commercial specifiers have relied on for decades. The dense fleck is doing practic...
Salt & Pepper Grey ›Where this format is used
- Residential floors throughout
- Office and retail floors
- Balconies and utility areas
- Compound and boundary paving
All Full Body Vitrified formats · About Full Body Vitrified tiles · Tile size guide
60 x 60 cm Full Body Vitrified — common questions
How many 60 x 60 cm tiles are in a box?
4 pieces, covering 1.44 square metres and weighing about 26 kg gross. A pallet holds 40 boxes.
How many square metres fit in a container?
Approximately 1,250 m² in a 20-foot container and 2,550 m² in a 40-foot, at 9 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 60 x 60 cm in inches?
About 24 x 24 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 60 x 60 cm Full Body Vitrified
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide