400 x 800 mm Outdoor & 20 mm Pavers Tiles
A 20 mm structural paver at a size two people can lift comfortably. Dry-laid on compacted gravel it builds a patio with no concrete at all, and any paver can be lifted later for access to what is underneath.
- 2 pieces per box — 0.64 m² coverage
- 20 mm thick, 29 kg per box
- Around 560 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 400 x 800 mm
- 40 x 80 cm
- 16 x 32 in
- Thickness 20 mm
- Rectified edges
Per Box
- 2 pieces
- 0.64 m² coverage
- 29 kg gross
Per Pallet
- 40 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 560 m²
- 40ft: approx 1,150 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Riven Stone Grey
Mid grey, cleft texture · Riven structured
A 20 mm paver with a deeply riven surface copying hand-split stone flags, in mid grey. Dry-laid on a compacted gravel bed with open joints it builds a...
Riven Stone Grey ›Sandstone Buff
Pale warm buff · Textured structured
A pale warm buff 20 mm paver with the fine grain of cut sandstone. The pale tone is the practical argument for it: around a pool or on a south-facing...
Sandstone Buff ›Where this format is used
- Dry-laid patios on gravel
- Garden paths and stepping runs
- Roof terraces on pedestals
- Poolside surrounds
All Outdoor & 20 mm Pavers formats · About Outdoor & 20 mm Pavers tiles · Tile size guide
40 x 80 cm Outdoor & 20 mm Pavers — common questions
How many 40 x 80 cm tiles are in a box?
2 pieces, covering 0.64 square metres and weighing about 29 kg gross. A pallet holds 40 boxes.
How many square metres fit in a container?
Approximately 560 m² in a 20-foot container and 1,150 m² in a 40-foot, at 20 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 0.64, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 40 x 80 cm in inches?
About 16 x 32 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 40 x 80 cm Outdoor & 20 mm Pavers
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide