200 x 1200 mm Step & Riser Sets Tiles
The matching riser. Covers a rise up to 200 mm and is shade-matched to its tread during production — buying the two separately, or topping up later, is the usual cause of a visible colour change partway down a flight.
- 5 pieces per box — 1.20 m² coverage
- 10 mm thick, 25 kg per box
- Around 1,050 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 200 x 1200 mm
- 20 x 120 cm
- 8 x 48 in
- Thickness 10 mm
- Rectified edges
Per Box
- 5 pieces
- 1.20 m² coverage
- 25 kg gross
Per Pallet
- 40 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,050 m²
- 40ft: approx 2,150 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Granite Grey Riser
Mid grey, fine speckle · Matt
The matching riser for the Granite Grey tread, produced and shade-matched in the same run. Risers carry no slip requirement because nobody stands on t...
Granite Grey Riser ›Marble White Riser
White with soft grey veining · Matt
The matching riser for the Marble White tread. Ordering the pair together is not a preference but a requirement in practice: shade varies between firi...
Marble White Riser ›Charcoal Riser
Deep charcoal · Matt
The matching riser for the Charcoal tread, and also used under pale treads where a recessed dark riser is wanted — a detail that makes a flight appear...
Charcoal Riser ›Where this format is used
- Stair risers matched to 300x1200 treads
- External stair risers
- Skirting and stringer runs
- Plinth details
All Step & Riser Sets formats · About Step & Riser Sets tiles · Tile size guide
20 x 120 cm Step & Riser Sets — common questions
How many 20 x 120 cm tiles are in a box?
5 pieces, covering 1.20 square metres and weighing about 25 kg gross. A pallet holds 40 boxes.
How many square metres fit in a container?
Approximately 1,050 m² in a 20-foot container and 2,150 m² in a 40-foot, at 10 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.20, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 20 x 120 cm in inches?
About 8 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 20 x 120 cm Step & Riser Sets
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
+21 more
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide
- Epoxy Flooring vs Tiles
- Wall Tiles vs Floor Tiles
- Small Bathroom Ideas on a Budget
- How to Clean Kitchen Tiles
- How to Remove Tile Scratches
- Floor Tile Border Designs
- Indian Flooring Tiles
- Indian Toilet Bathroom Design
- Kitchen Dado Tiles
- Wash Basin Counter Design
- Flush Valve vs Flush Tank
- Wall vs Floor Mounted Toilet
- Portico Design
- Outside Stairs Design