300 x 1200 mm Full Body Vitrified Tiles

A plank proportion in full body porcelain. Laid in a brick or staggered bond it gives a floor direction, which is useful in corridors and long rooms; it is also the field tile that matches our 300 mm stair treads.

  • 4 pieces per box — 1.44 m² coverage
  • 10 mm thick, 30 kg per box
  • Around 1,120 m² in a 20ft container

પૂછપરછ ઉત્પાદનો

Packing and logistics

The figures an importer needs to convert an area into an order, and an order into a container booking.

Dimensions

  • 300 x 1200 mm
  • 30 x 120 cm
  • 12 x 48 in
  • Thickness 10 mm
  • Rectified edges

Per Box

  • 4 pieces
  • 1.44 m² coverage
  • 30 kg gross

Per Pallet

  • 36 boxes
  • Shrink-wrapped and corner-protected
  • Shade and calibre marked

Per Container

  • 20ft: approx 1,120 m²
  • 40ft: approx 2,280 m²
  • Mixed loads available
  • FOB / CIF / CFR

Colours in this format

Each shade below is produced in this format. Physical samples are sent before any container is committed.

Slate Anthracite

Dark blue-grey · Structured

A dark blue-grey with a lightly riven surface that follows the cleft of split slate. In a plank proportion and laid in a staggered bond it reads convi...

Slate Anthracite ›

Oak Natural

Warm mid brown · Matt, grain textured

A warm mid-brown timber tone achieved through pigment and surface relief rather than printing, so the grain is felt rather than seen in detail. It is...

Oak Natural ›

Linen Grey

Pale grey, fabric texture · Matt, fine texture

A pale grey carrying a fine woven texture, closer to natural linen than to stone. The texture is shallow enough not to trap dirt but deep enough to so...

Linen Grey ›

Where this format is used

  • Corridors and long rooms
  • Plank-effect floors
  • Stair landings matched to treads
  • Cladding and skirting runs

30 x 120 cm Full Body Vitrified — common questions

How many 30 x 120 cm tiles are in a box?

4 pieces, covering 1.44 square metres and weighing about 30 kg gross. A pallet holds 36 boxes.

How many square metres fit in a container?

Approximately 1,120 m² in a 20-foot container and 2,280 m² in a 40-foot, at 10 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.

How many boxes do I need?

Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.

What is 30 x 120 cm in inches?

About 12 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.

Request pricing for 30 x 120 cm Full Body Vitrified

Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.

પૂછપરછ