300 x 1200 mm Full Body Vitrified Tiles
A plank proportion in full body porcelain. Laid in a brick or staggered bond it gives a floor direction, which is useful in corridors and long rooms; it is also the field tile that matches our 300 mm stair treads.
- 4 pieces per box — 1.44 m² coverage
- 10 mm thick, 30 kg per box
- Around 1,120 m² in a 20ft container
Packing and logistics
The figures an importer needs to convert an area into an order, and an order into a container booking.
Dimensions
- 300 x 1200 mm
- 30 x 120 cm
- 12 x 48 in
- Thickness 10 mm
- Rectified edges
Per Box
- 4 pieces
- 1.44 m² coverage
- 30 kg gross
Per Pallet
- 36 boxes
- Shrink-wrapped and corner-protected
- Shade and calibre marked
Per Container
- 20ft: approx 1,120 m²
- 40ft: approx 2,280 m²
- Mixed loads available
- FOB / CIF / CFR
Colours in this format
Each shade below is produced in this format. Physical samples are sent before any container is committed.
Slate Anthracite
Dark blue-grey · Structured
A dark blue-grey with a lightly riven surface that follows the cleft of split slate. In a plank proportion and laid in a staggered bond it reads convi...
Slate Anthracite ›Oak Natural
Warm mid brown · Matt, grain textured
A warm mid-brown timber tone achieved through pigment and surface relief rather than printing, so the grain is felt rather than seen in detail. It is...
Oak Natural ›Linen Grey
Pale grey, fabric texture · Matt, fine texture
A pale grey carrying a fine woven texture, closer to natural linen than to stone. The texture is shallow enough not to trap dirt but deep enough to so...
Linen Grey ›Where this format is used
- Corridors and long rooms
- Plank-effect floors
- Stair landings matched to treads
- Cladding and skirting runs
30 x 120 cm Full Body Vitrified — common questions
How many 30 x 120 cm tiles are in a box?
4 pieces, covering 1.44 square metres and weighing about 30 kg gross. A pallet holds 36 boxes.
How many square metres fit in a container?
Approximately 1,120 m² in a 20-foot container and 2,280 m² in a 40-foot, at 10 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.
How many boxes do I need?
Divide your measured area in square metres by 1.44, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.
What is 30 x 120 cm in inches?
About 12 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.
Request pricing for 30 x 120 cm Full Body Vitrified
Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.
पूरी रेंज देखें
खरीद गाइड
- टाइल खरीद गाइड
- फुल बॉडी बनाम GVT टाइल्स
- स्टेप और राइज़र टाइल गाइड
- GVT बनाम PGVT
- टाइल साइज़ गाइड
- लैमिनेट गाइड
- पोर्सिलेन बनाम सिरेमिक टाइल्स
- विट्रिफाइड टाइल्स क्या हैं
- टाइल्स के प्रकार
- टाइल मोटाई गाइड
- ग्लॉसी बनाम मैट टाइल्स
- टाइल फर्श कैसे साफ़ करें
- टाइल के दाग कैसे हटाएँ
- टूटी टाइल कैसे बदलें
- मार्बल फर्श कैसे साफ़ करें
- बाथरूम साइज़ गाइड
- पाउडर रूम गाइड