300 x 1200 mm Step & Riser Sets Tiles

The standard tread. 300 mm deep suits a going of roughly 290 to 305 mm, which covers most domestic and commercial stairs, and 1200 mm wide covers most flights in one piece. Nosing is formed in production, not ground on site.

  • 3 pieces per box — 1.08 m² coverage
  • 10-12 mm thick, 27 kg per box
  • Around 980 m² in a 20ft container

पूछताछ उत्पाद

Packing and logistics

The figures an importer needs to convert an area into an order, and an order into a container booking.

Dimensions

  • 300 x 1200 mm
  • 30 x 120 cm
  • 12 x 48 in
  • Thickness 10-12 mm
  • Rectified edges

Per Box

  • 3 pieces
  • 1.08 m² coverage
  • 27 kg gross

Per Pallet

  • 36 boxes
  • Shrink-wrapped and corner-protected
  • Shade and calibre marked

Per Container

  • 20ft: approx 980 m²
  • 40ft: approx 2,000 m²
  • Mixed loads available
  • FOB / CIF / CFR

Colours in this format

Each shade below is produced in this format. Physical samples are sent before any container is committed.

Granite Grey Tread

Mid grey, fine speckle · Grooved anti-slip

The workhorse tread. Mid grey with a fine speckle in full body porcelain, with a grooved nosing rated R11 — the specification for any staircase in a p...

Granite Grey Tread ›

Marble White Tread

White with soft grey veining · Matt bullnose

A white marble-effect tread with a smooth bullnose front edge, for interior domestic staircases in dry areas. The bullnose is comfortable underfoot an...

Marble White Tread ›

Wood Brown Tread

Warm mid brown, grain texture · Matt bullnose

A warm timber-toned tread with surface grain, for staircases that need to read as wood without being wood. It is the usual answer where a house has ti...

Wood Brown Tread ›

Charcoal Tread

Deep charcoal · Grooved anti-slip

A deep charcoal tread with grooved R11 nosing, most often specified against a pale field tile so the step edge is visually obvious. That contrast is n...

Charcoal Tread ›

Where this format is used

  • Stair treads, domestic and commercial
  • External step treads in grooved finish
  • Matching landing edges
  • Pool and terrace steps

स्टेप और राइज़र सेट · स्टेप और राइज़र टाइल्स · टाइल साइज़ गाइड

30 x 120 cm Step & Riser Sets — common questions

How many 30 x 120 cm tiles are in a box?

3 pieces, covering 1.08 square metres and weighing about 27 kg gross. A pallet holds 36 boxes.

How many square metres fit in a container?

Approximately 980 m² in a 20-foot container and 2,000 m² in a 40-foot, at 10-12 mm thickness. Thicker tiles hit the payload limit before they fill the volume, so the figure drops sharply above 12 mm.

How many boxes do I need?

Divide your measured area in square metres by 1.08, round up, then add ten per cent for cuts, breakage and future repairs — fifteen per cent for a diagonal or herringbone layout.

What is 30 x 120 cm in inches?

About 12 x 48 in. The metric figure is the exact one, because the tile is manufactured to metric dimensions and imperial equivalents are always approximate.

Request pricing for 30 x 120 cm Step & Riser Sets

Tell us the shades and the area and we will convert it to boxes, quote per square metre and work out the container split.

पूछताछ

संबंधित पृष्ठ

उत्पाद सूची

टाइल श्रेणियाँ

लैमिनेट

सैनिटरीवेयर

कमरे के अनुसार टाइल्स

निर्यात बाज़ार

हम जिन उद्योगों को आपूर्ति करते हैं

खरीद गाइड

पीस बिल्डकॉन के बारे में